Introduction: F18 is an innovative biometric fingerprint reader for access control applications, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed. The F18 features the fastest commercial-based fingerprint matching algorithm and ZK high-performance, high-image quality optical fingerprint sensor. The device offers the flexibility to be installed standalone or with any third party panel that supports 26-bit Wiegand. All the operation can be done on the TFT-LCD. The fingerprint image will display on the screen . That will guide the user to put the finger on to proper position and increase the recognition rate. TCP/IP and RS485 are available that the device can be used in different network. Features: Fingerprint reader with durable and highly accurate ZK optical sensor 1 touch a-second user recognition Stores 3,000 templates,100,000 transactions Reads Fingerprint and/or Card Optional integrated smart card reader Built-in Serial and Ethernet ports Tamper-proofs switch and alarm outputs Request-to-exit and alarm contacts Audio-Visual indications for acceptance and rejection of valid/invalid fingers Specifications: Fingerprint Capacity:3000 templates ID/IC card Capacity:Optional Transaction Capacity:100,000 Sensor:ZK Optical Sensor Algorithm Version:ZK Finger v10.0 Communication:RS232/485, TCP/IP, USB-host Access Control Interface for:3rd party electric lock, door sensor, exit button, alarm, Door Bell Wiegand Signal:Output and Input Display:TFT LCD Screen Standard function:Webserver, DLST Optional function:MF card Power Supply:12V DC Operating Temperature:0 C- 45C Operating Humidity:20%-80% Operating Temperature:0 C- 45C Operating Humidity:20%-80% Image: FR1200 fingerprint reader: Introduction:
FR1200 is a fingerprint reader with RS485 communication interface works with biometric access controllers and fingerprint standalone access control, including inBIO series controllers, F8 and so on. It offers the function of capturing and transferring fingerprint samples to access control panel inside to match. With its IP65 rated rugged structure, FR1200 offers extra durability in all weather conditions including outdoor environments.
CPU: 324MHz Sensor: ZK small-sized sensor Communication: RS485 Standard function: ID Card Module Optional function: MF Card Module Voice Prompt: Buzzer Working Voltage: 12VDC Working Temperature: 0~45 Dimension(W*H*D)mm: 50*102*37.3 Protection Grade: IP65 EM Lock: Features:
Use magnetic power to lock the door, 280kgs (600lbs) holding force.
Built-in reverse current protection device (MOV).
Alluminum shell adopts high strength material, with hard anodised processing.
Good quality and durable to use.
Can be opened by push button, remote controller, etc.
Fit for wooden door, metal door, glass door, fireproof door, etc. Specifications:
Holding force: 280kgs
Voltage: DC 12V
Working temperature: -10 to 55 Celsius degree (14 to 131 Fahrenheit degree)
Humidity: 0 to 95%
Working mode: power-on to lock
Lock size: 25 * 4.6 * 2.5cm
Plate size: 18 * 3.8 * 1.6cm
Package weight: 2KG
Power supply: Features: 100% Brand New. Size: Approx. 212 x 172 x 70mm(L x W x H) Weight: 1.1kg Input voltage: 110~240v Input Frequency: 50~60Hz Output voltage: DC 12V Output Current: 5A Output voltage trim range: ±10%~ ±15% Insulation voltage: Junior/sub-polar inter-1500v ac, primary/shell between 1500V AC, subpolar/shell between 500V AC Hold time: full load typically 20ms Operating temperature: -20~ ±35 degree Overload protection: All output in a short circuit, overload are protected; Power output of 0-15 seconds delay locks Wired door bell: Specifications:
- Wired door bell 12V for security access control
- 100% Brand New and high quality
- Features a bell sound, small size and wall-mount hole, very easy to install
- Switch is not included
- Working Voltage: DC 12V
– Approx. 87 (W) x 62 (H) x 23 (D) mm
– Approx. 3-1/2″ (W) x 2-1/2″ (H) x 1″ (D) inch
- Material: Plastic
- Color: White
- Red +12V
- Black GND
- Yellow SWITCH
- Green SWITCH
Remote control: Product instroction
The company receives the remote control board, suitable for security alarm, remote control electric doors and Windows, signal control, industrial control, the electric control circuit of lifting equipment, etc. All remote control switch module, relay contact output independently, is very suitable for direct control of various load; Products adopt wireless fixed code technology, omnidirectional, noninterference switch. 12 v remote control switch, the power supply proposal with more than 500 ma dc regulated power supply.
Channel: 1 CH Remote Control Distance: 0-50m (Please notice that is the ideal distance without any block and signal interfere, it would rise and fall about 10%-50% with the block and signal interference.) Encode: Fixed code, soldering 2260 2262 Frequency: 315MHz or 433MHz (Default 315MHz) 2. Receiver Channel: 1CH Power Supply (Operating Voltage): DC 12V Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC Sensitivity: -105 dBm Operating Temperature: -40 C ~ +80 C Size: 70mm*50mm*18mm Output way: Inter-lock